Hey guys, take a look at the photo below and tell me if it looks correct. It's a 58 beetle, rear driver's side drum. Changed out the seals a while back but still getting oil in the drums causing my rear brakes to be useless. I'm not sure if I should be running the tube style oil slingers (don't currently have them) but it doesn't look like they would sit right in there.
I am planning on pulling it apart and throwing some permatex on the seal tomorrow morning (can visibly see oil leaking from around the bottom of the red paper seal) but is there anything else y'all can think of?
(EDIT: Yea, I know the brake cylinder is pokin' out on the right side, the photo is old, that problem is fixed.)