| der Luftkühlers http://www.dlkweb.org/phpBB3/ |
|
| Clutch fork http://www.dlkweb.org/phpBB3/viewtopic.php?f=11&t=6046 |
Page 1 of 1 |
| Author: | Boom [ Wed Nov 06, 2013 8:17 pm ] |
| Post subject: | Clutch fork |
Anyone replace theirs and have issues with the inner snap ring groove not even there? Mine is in the bushing. I have tried two different shafts and they both line up that way. I am considering cutting the bushing to allow the groove to be usable what are some of your opinions and thoughts. The bushing is plenty long enough I just don't know why this is designed that way. The original one doesn't use snap rings but a spacer instead. |
|
| Author: | Dlicious [ Thu Nov 07, 2013 5:15 pm ] |
| Post subject: | Re: Clutch fork |
I would probably cut it. The forks are the biggest piece of crap that came outta China. I think I used my old fork and used the new bushings. |
|
| Author: | Boom [ Tue Nov 12, 2013 6:28 pm ] |
| Post subject: | Re: Clutch fork |
I cut the bushing and it works pretty good now. |
|
| Author: | Dlicious [ Tue Nov 12, 2013 9:53 pm ] |
| Post subject: | Re: Clutch fork |
I'm glad you finally came to your senses..... |
|
| Author: | Boom [ Wed Nov 13, 2013 6:25 am ] |
| Post subject: | Re: Clutch fork |
This is true. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|