der Luftkühlers http://www.dlkweb.org/phpBB3/ |
|
1968 bug e brake cable http://www.dlkweb.org/phpBB3/viewtopic.php?f=13&t=5420 |
Page 2 of 2 |
Author: | 69vduber [ Sun Dec 02, 2012 1:56 pm ] |
Post subject: | Re: 1968 bug e brake cable |
supaninja wrote: Ethan and Doug are the self proclaimed brake bleeding guru's lol, I'm just messing guys Here is how I do it: adjusters all the way in, and eyeball centering the shoes put the drum on torque the axle nut adjust the shoes till there is some drag on it adjust the e-brake bleed...rear right first, then rear left, front right, front left done, light a menthol and drink a monster And you forgot to mention it should only take about 30min.... |
Author: | Dgunn427 [ Wed Dec 05, 2012 9:40 pm ] | ||||
Post subject: | Re: 1968 bug e brake cable | ||||
Ok. Where are the guru's? Help. As I suspected the ebrake cable drags on the drum even before I get the drum on all the way. I was told the 68 has a specific ebrake cable and that's what I have. I compared it against the old one and it appears to be identical. I just took the entire rear brakes apart for the second time and put it back together. I do not have the shoes adjusted or bled and I do not have the cable reconnected to the brake handle. However, I can't image those adjustments are going to take out this much slack (See photos). Do I have something wrong? Any thoughts? Thanks David
|
Author: | supaninja [ Wed Dec 05, 2012 9:53 pm ] |
Post subject: | Re: 1968 bug e brake cable |
I think you are making this a lot more complicated then it is. If your old cable worked and the new one is the same length then it should be good to go. Yes you will be pulling up the slack when tighten it up at the handle end. |
Author: | 69vduber [ Thu Dec 06, 2012 7:11 am ] |
Post subject: | Re: 1968 bug e brake cable |
my 69 I did last year. but the other side. i did not have any trouble getting the drum on. and here is aview before. same side as yours. Did you match the old shoes to the new to be sure they all look the same? |
Author: | Dgunn427 [ Thu Dec 06, 2012 10:51 pm ] |
Post subject: | Re: 1968 bug e brake cable |
Thanks. The photos help alot David |
Author: | Dgunn427 [ Sat Dec 08, 2012 10:40 pm ] |
Post subject: | Re: 1968 bug e brake cable |
Yep. I attached the new brake cable to the handle and all the slack is gone. Sometimes you have to complete the task before you judge it. On to the other side. Thanks for the comments. David |
Author: | supaninja [ Sun Dec 09, 2012 12:08 am ] |
Post subject: | Re: 1968 bug e brake cable |
Author: | 69vduber [ Sun Dec 09, 2012 7:25 am ] |
Post subject: | Re: 1968 bug e brake cable |
Now "get r done" |
Page 2 of 2 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |