der Luftkühlers http://www.dlkweb.org/phpBB3/ |
|
converting gauges http://www.dlkweb.org/phpBB3/viewtopic.php?f=14&t=2452 |
Page 1 of 1 |
Author: | Boom [ Sun May 31, 2009 1:31 pm ] |
Post subject: | converting gauges |
I am working on a 78 ford truck that I am installing a vintage ford speedo with gauges built in the speedo my question here is how do I wire this gauge to accept a 12v negative ground system as these are made for a 6v positive ground system any help would be greatly appreciated |
Author: | Fitz [ Sun May 31, 2009 8:26 pm ] |
Post subject: | Re: converting gauges |
that would be a good question for the bug whisperer....joe where you at |
Author: | Boom [ Sun May 31, 2009 8:42 pm ] |
Post subject: | Re: converting gauges |
yea I sent him a message after I wrote this up |
Author: | RyanW [ Sun May 31, 2009 9:02 pm ] |
Post subject: | Re: converting gauges |
His internet has been down for a while, call him. |
Author: | mk-Zero [ Sun May 31, 2009 9:59 pm ] |
Post subject: | Re: converting gauges |
I would *think* that you could just use a volt-a-drop to get 6V and then hook the + up as the ground and the - as the hot. You would have to make sure that it wasn't otherwise grounded to chassis ground though. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |