| der Luftkühlers http://www.dlkweb.org/phpBB3/ |
|
| beam centering? http://www.dlkweb.org/phpBB3/viewtopic.php?f=18&t=3846 |
Page 1 of 1 |
| Author: | nipples1 [ Thu Feb 03, 2011 7:30 pm ] |
| Post subject: | beam centering? |
got a 70 standard, is it possible that the beam isnt centered? Passenger side tire is flush to the outside of the fender, yet driver is about an inch outside the fender.  measurements from frame head to beam are off by about a 1/4 inch to the driver side. Measurements from top of tire to inner fenderwell are roughly an inch to the driverside, so that makes sense. But how? Ghetto style I could just space out the pass wheel, really dont wanna do that.  anyone?
|
|
| Author: | 69vduber [ Thu Feb 03, 2011 7:44 pm ] |
| Post subject: | Re: beam centering? |
Didn't you replace a front fender and is it the same as the other? |
|
| Author: | ConcreteAce [ Thu Feb 03, 2011 7:49 pm ] |
| Post subject: | Re: beam centering? |
could be that it has been hit up front. easy to tell just by measuring from different spots. also you could have aftermarket fenders as well. |
|
| Author: | nipples1 [ Thu Feb 03, 2011 8:53 pm ] |
| Post subject: | Re: beam centering? |
yeah changed out fender with with an orig, measurements say the same on fenders. Wasn`t that bad of a hit though, all measurements from frame head to innerwells same. no creases in pan, frame head or any obvious areas. fender front quarter and apron took the brunt of it, uhhhhhhhhhhhhhhhhhhh I dont know. 
|
|
| Author: | 69vduber [ Thu Feb 03, 2011 9:19 pm ] |
| Post subject: | Re: beam centering? |
what about the wheel offset ... flip them around and see if it follows. |
|
| Author: | nipples1 [ Thu Feb 03, 2011 9:29 pm ] |
| Post subject: | Re: beam centering? |
true  . Hey I still want that hood maybe monday if you can.
|
|
| Author: | 69vduber [ Thu Feb 03, 2011 10:16 pm ] |
| Post subject: | Re: beam centering? |
That would be good... do you need bumpers? I live by Klein High School and will be working from home. Let me know. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|