That is true
| der Luftkühlers http://www.dlkweb.org/phpBB3/ |
|
| T handle nut pitch size http://www.dlkweb.org/phpBB3/viewtopic.php?f=2&t=6846 |
Page 1 of 1 |
| Author: | ConcreteAce [ Thu Jan 12, 2017 6:36 pm ] |
| Post subject: | T handle nut pitch size |
I have gone and lost the nut for my T handle. I know it is an M10 but I can not figure out the pitch size. I tried an M10 X 1.0 it wobbles a bit it seems like the thread on the handle is a little finer thread. Any help would be appreciated, my pitch finder in my tap set does not have the right size. Thanks |
|
| Author: | 69vduber [ Fri Jan 13, 2017 10:30 pm ] |
| Post subject: | Re: T handle nut pitch size |
It is bad when you lose a nut. |
|
| Author: | ConcreteAce [ Fri Jan 13, 2017 10:46 pm ] |
| Post subject: | Re: T handle nut pitch size |
That is true
|
|
| Author: | Chisel_86 [ Sun Jan 15, 2017 5:02 pm ] |
| Post subject: | Re: T handle nut pitch size |
What T-handle is it? I have a Scat Drag fast with a T and lock nut that we could maybe use for reference... |
|
| Author: | ConcreteAce [ Sun Jan 15, 2017 5:41 pm ] |
| Post subject: | Re: T handle nut pitch size |
Deck Lid thandle
|
|
| Author: | Chisel_86 [ Mon Jan 16, 2017 9:23 am ] |
| Post subject: | Re: T handle nut pitch size |
ConcreteAce wrote: Deck Lid thandle Oohhhhhhhhh, ok  
|
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|