I'm placing an order on Tuesday if anybody needs some of this epoxy paint.
Shipping is around $5-$6 from Lago Vista to any Texas town.
KBS Rust Seal Application Info Application InfoThe light rust can be sanded and neturlized with phosphoric acid or rust blast.
You need to scuff the paint with a red scotch brite pad and then apply KBS rust seal.
Thin coats and then let the first coat get tacky and then apply the second. A good paint brush is fine. (Don't skimp it will leave hair in your paint)
You can also thin the KBS with paint thiner a little. A quart would work fine for 2 coats on both sides. After installation of course (pan halves that is).
You need to mix the KBS and pour it into a cup to apply. never pour leftover back into the can as it will ruin (harden) the balance in the can.
You will also need a new brush with each coat. A resporator mask is good so can think later in life and you must wear gloves if you don't want to wear this paint for a week or more on your skin. It's that tough.
Go to this site for more research and color charts.
http://www.kbs-coatings.com/RustSeal.html Gloss black it the color of choice. The grey is quite nice too.
Quart price from me is $38.00 flat (Cash or paypal)
Let me know what you might need and I'll let you know if I have it in stock.
If not it takes 3-4 days to get it to me.
I make $3.85a can on this stuff so I'm not doing it for the money.
If you want you can order direct from the KBS website too.
I also have
Gas Tank Sealer.
Bug (Pint) $20.00 per can.
Bus (Quart) $34.00 per can .
Scott in Lago
scottmcnew@yahoo dot com
Five One Two 4 Six 6 Five Five Zero 5 Mobile/Text OK