Billet Countersunk Washers & Stainless Bolts

kostya.lyt · **Posted:** Thu Mar 31, 2011 1:41 pm

Eric and I got a run of washers made to see how they would be and if there is any interest.

6mm washers and bolt (12mm thread length) that will work on all engine tin locations and decklid bolts.

8mm washers that are most commonly used to bolt fenders to the car.

$2.25 per set of washer and bolt (M6x16) for the 6mm.
$2.50 per set of washer and bolt (M8x25) for the 8mm.

Fender kit includes 38 washers, 36 bolts, and 2 nuts for $95 shipped.

Note: These WILL NOT be fully polished with the lettering ground off and polished. They will be raw or a very light polish for a little bit of shine.

Let me know if anybody is interested!

4130_nasa · **Posted:** Thu Mar 31, 2011 1:48 pm

PM sent

kostya.lyt · **Posted:** Thu Mar 31, 2011 1:53 pm

They look like these. I'll get some better pictures.

EAnderson · **Posted:** Thu Mar 31, 2011 5:16 pm

EAnderson · **Posted:** Thu Mar 31, 2011 5:28 pm

kostya.lyt · **Posted:** Fri Apr 01, 2011 7:16 am

That's a sweet display case! :thumbs:

TexasDeuce · **Joined:** Tue Aug 05, 2008 9:32 pm **Posts:** 40

I'll bite.... I am not sure how many bolts/washers are needed for a '66.

what is the total for a set of deck lid and engine tin bolts/washers.

PayPal ok?

kostya.lyt · **Posted:** Fri Apr 01, 2011 4:28 pm

TexasDeuce wrote:

I'll bite.... I am not sure how many bolts/washers are needed for a '66.

what is the total for a set of deck lid and engine tin bolts/washers.

PayPal ok?

20 should be enough for the visible tin bolts and 4 decklid bolts.

PM sent.

oval1 · **Posted:** Fri Apr 01, 2011 8:26 pm

Very cool touch to your custom ride :thumbs:

EAnderson · **Posted:** Fri Apr 01, 2011 8:47 pm

kostya.lyt wrote:

That's a sweet display case! :thumbs:

All filled up now!

I'm keeping them

Billet Countersunk Washers & Stainless Bolts

Who is online