copied from the 912 board so if some of it doesnt make sense, my bad
Update after yet another long weekend in the garage
Got the Dellorto's installed after swapping to 30 vents from the 34's. installed the CB Performance 912 linkage arms that are supposed to pop into the stock 912 linkage. They don't. I had to carefully file down the ball ends, then clean them up with 300, 600, 1k and then 1.5k sandpaper. Frustrating when they should just fit. The bugpack dellorto to stock 912 manifold adapters are actually decent.
The linkage is not as smooth as I think it should be. I need to work on that, primarily what's going on behind the shroud. It works but just doesn't feel right
Also got the Firestone F560 165x15's mounted on the 15x4.5 fuchs. They look great
Unfortunately, I didn't get further than my driveway. The front right rebuilt caliper is leaking in between the halves. One pump and the brakes work, but that first pump there is nothing. I'll discuss with the vendor this week, I really wanted to drive it
Anyways, pics and a video if it uploads. Sometimes I'm blocked from youtube at work, but not always
[youtube]https://www.youtube.com/watch?v=SaqzQsJ2PKo[/youtube]