der Luftkühlers http://www.dlkweb.org/phpBB3/ |
|
1968 Baja "Das Vanilla" http://www.dlkweb.org/phpBB3/viewtopic.php?f=8&t=6737 |
Page 8 of 8 |
Author: | mk-Zero [ Sat Apr 08, 2017 9:47 am ] |
Post subject: | Re: 1968 Baja "Das Vanilla" |
I dig it! But it will look a lot better about 2-3" higher. |
Author: | ConcreteAce [ Sun Apr 09, 2017 12:04 am ] |
Post subject: | Re: 1968 Baja "Das Vanilla" |
mk-Zero wrote: I dig it! But it will look a lot better about 2-3" higher. That is my plan. Thing parts are not cheap though so it will have to wait for awhile. |
Author: | Chisel_86 [ Mon Apr 10, 2017 7:55 am ] |
Post subject: | Re: 1968 Baja "Das Vanilla" |
ConcreteAce wrote: mk-Zero wrote: I dig it! But it will look a lot better about 2-3" higher. That is my plan. Thing parts are not cheap though so it will have to wait for awhile. What are you planning to use? |
Author: | mk-Zero [ Mon Apr 10, 2017 9:08 am ] |
Post subject: | Re: 1968 Baja "Das Vanilla" |
I think he said he was going with this set up. I think it was a 2-3 FOOT lift, not 2-3 inches |
Author: | Redjames [ Mon Apr 10, 2017 1:27 pm ] |
Post subject: | Re: 1968 Baja "Das Vanilla" |
look good but need little bit more higher. |
Author: | ConcreteAce [ Tue Apr 11, 2017 10:56 pm ] |
Post subject: | Re: 1968 Baja "Das Vanilla" |
Chisel_86 wrote: What are you planning to use? Thing front arms and spindles which should give me about 3" in front and 3x3 rears. |
Author: | mk-Zero [ Wed Apr 12, 2017 9:52 am ] |
Post subject: | Re: 1968 Baja "Das Vanilla" |
3x3 rear with stock width front? |
Author: | tommiebsmith [ Wed Apr 12, 2017 2:58 pm ] |
Post subject: | Re: 1968 Baja "Das Vanilla" |
ScottyG wrote: BadAzzness! Yep that about sums it up! |
Author: | ConcreteAce [ Wed Apr 12, 2017 11:59 pm ] |
Post subject: | Re: 1968 Baja "Das Vanilla" |
mk-Zero wrote: 3x3 rear with stock width front? I am running a 4" rim on the front right now and a 6" rim in the rear. With that combo the front is still wider than the rear by 1.5 " I plan on adding disc brakes someday that will probably push the fronts out an additional 1" per side. Adding the 3x3 still is short by 1/2 an inch with disc and if I dont add disc I can move up a size in the front rim. At least that is my plan. My main issue is rear shock mount. Most people tie the 3x3 shock to a cage which I dont have.....yet |
Author: | mk-Zero [ Thu Apr 13, 2017 8:46 am ] |
Post subject: | Re: 1968 Baja "Das Vanilla" |
Sounds like a plan! |
Page 8 of 8 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |