der Luftkühlers http://www.dlkweb.org/phpBB3/ |
|
73 Thing for the middle Daughter http://www.dlkweb.org/phpBB3/viewtopic.php?f=8&t=6765 |
Page 1 of 2 |
Author: | freebird [ Sat Jun 11, 2016 8:39 pm ] |
Post subject: | Re: 73 Thing for the middle Daughter |
She's got a great dad!! NO ONE is lucky enough to roll a Thing now days to school!! |
Author: | Marko [ Sun Jun 12, 2016 10:30 am ] |
Post subject: | Re: 73 Thing for the middle Daughter |
Glad you found one for her |
Author: | ConcreteAce [ Mon Jun 13, 2016 5:37 am ] |
Post subject: | Re: 73 Thing for the middle Daughter |
Awesome!! Looks like a good father/daughter project ahead. |
Author: | 69vduber [ Mon Jun 13, 2016 7:59 am ] |
Post subject: | Re: 73 Thing for the middle Daughter |
looks like fun. I'll be bringing a 74 after our house deal. |
Author: | edragndean [ Mon Jul 04, 2016 8:08 pm ] |
Post subject: | Re: 73 Thing for the middle Daughter |
How I spent my Sunday. Finally got the last of the triple layered, welded, angle iron floors cut out, lots of careful surgery removing the welds without damaging the tunnel/rockers. Frame is in great shape, inner driver rocker needs some rust repair (beyond the hacked out hole to clear the custom seats). Worked the passenger doors, hinges were rusted, now they open and remove as they should. Replaced the seals on the top and bottom of the windshield, and windshield to dash seal. Replaced the missing pad below the glove box. Replaced the connection bar and lubed the pivots on the wiper arms. Making progress slowly... |
Author: | ConcreteAce [ Tue Jul 05, 2016 12:00 am ] |
Post subject: | Re: 73 Thing for the middle Daughter |
Thanks for the update! |
Author: | RyanW [ Tue Jul 05, 2016 8:13 pm ] |
Post subject: | Re: 73 Thing for the middle Daughter |
You will be finished in no time! That's a lot of work for a weekend. |
Author: | edragndean [ Sun Nov 20, 2016 9:28 am ] |
Post subject: | Re: 73 Thing for the middle Daughter |
Making progress. Thanks Ethan, Ryan, Jason, and Jeremy for the help. Separated the pan from the body, trimmed and welded all the necessary attachments (seat tracks, battery mount, seat belt mount, pedal stop, jack points, jack support braces). Three rims/tires stacked on top of each other make for a good body holder over the pan... wish I had taken pictures of my getto stand... Driver side rocker needed rust repair lower three inches inner/outer, and repaired holes on both sides. Put POR 15 on outer edges of the new floor pans, installed new floor pan seal, then bolted pan halves to body. Dropped body back on the chassis and bolted everything up before welding pan halves to tunnel so I wouldn't have any issues with alignment. POR 15 with Chassis Black Top Coat. |
Author: | edragndean [ Sun Nov 20, 2016 9:47 am ] |
Post subject: | Re: 73 Thing for the middle Daughter |
Needed to address some rust under the dash/foot well area. Knowing that POR 15 is a bad idea on actual body panels, I just sanded down and applied only the chassis black top coat to the inside of the rockers and under the dash. |
Page 1 of 2 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |