der Luftkühlers
http://www.dlkweb.org/phpBB3/

where to get heads machined to increase compression......
http://www.dlkweb.org/phpBB3/viewtopic.php?f=9&t=4511
Page 1 of 1

Author:  PawpawsBug [ Sat Oct 08, 2011 3:31 pm ]
Post subject:  where to get heads machined to increase compression......

it was suggested to me to get heads machined to increase my compression, so i am taking the 67 apart to do some improvements .... figure this is a good time as any to do address engine items as well...

Author:  mk-Zero [ Sat Oct 08, 2011 3:55 pm ]
Post subject:  Re: where to get heads machined to increase compression......

I would think that David's Machine Ship could do it. It's tricky business though, you need an accurate burette to do it properly and you need to go a little bit at a time. They *should* be able to handle it though, you will just need to specify the final chamber volume you want.

Author:  PawpawsBug [ Sat Oct 08, 2011 9:39 pm ]
Post subject:  Re: where to get heads machined to increase compression......

mk-Zero wrote:
I would think that David's Machine Ship could do it. It's tricky business though, you need an accurate burette to do it properly and you need to go a little bit at a time. They *should* be able to handle it though, you will just need to specify the final chamber volume you want.

got an address and or number, i would greatly appreciate it bud

Author:  Chris P [ Sat Oct 08, 2011 9:46 pm ]
Post subject:  Re: where to get heads machined to increase compression......

Get them decked and that will increase your compression.

Author:  PawpawsBug [ Sat Oct 08, 2011 9:54 pm ]
Post subject:  Re: where to get heads machined to increase compression......

Chris P wrote:
Get them decked and that will increase your compression.

thats my plan, just not sure where to send them do have them done right, NAPA sent me to a guy in cleveland, that guy said he hasnt done VW heads in forever and isnt set up for it. so now im on the hunt for who can , that way i can ship them out if need be. once i get Kostya to let me know how much i need to have machined.

Author:  supaninja [ Sat Oct 08, 2011 9:56 pm ]
Post subject:  Re: where to get heads machined to increase compression......

They did all my head work http://rimcovw.com/ :thumbs:

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/