It is currently Tue Oct 07, 2025 3:25 pm

All times are UTC - 6 hours




Post new topic Reply to topic  [ 98 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7, 8, 9, 10  Next
Author Message
 Post subject: Re: 58 ragtop Houston TX
PostPosted: Fri Feb 15, 2013 9:24 am 
Offline
User avatar

Joined: Fri Apr 27, 2012 8:40 pm
Posts: 83
Location: Allen, TX
ConcreteAce wrote:
scott_pfeiffer wrote:
My rears are 15x8 and fit just fine with no rubbing and no spacers.



Yes but you also have about 2-3 inches of air above your tire and looking at your picture you posted your tires stick out either even with the fender or past the fender lip. To me it looks to be past the fender. Jason is usually way lower with his cars in the past. Like I mentioned there are several offsets with those rims there is a 951, 911, and I think a 930 or 944 offset



I'm a bit higher in that pic than what it's sitting now but you are correct on the tires with the lip of the fender. In that pic, I'm running coil overs on the rear but I've gone back to KYB gas shocks and it sits tighter to the fender. Still no rub. I'll try to remember to snap a pic from side and rear when I get home and post them.

_________________
1964 Bug "Skye", someday to have the real ragtop clip on her.


Top
 Profile  
 
 Post subject: Re: 58 ragtop Houston TX
PostPosted: Fri Mar 29, 2013 7:53 am 
Offline
User avatar

Joined: Sun Feb 26, 2012 5:48 pm
Posts: 552
update

Image

Image

_________________
Jason Wallace
smgpsinstall.com

1958 Ragtop ( show car project )
1966 Vert ( My Driver )
2013 turbo beetle (Amys driver)


Top
 Profile  
 
 Post subject: Re: 58 ragtop Houston TX
PostPosted: Fri Mar 29, 2013 7:58 am 
Offline
User avatar

Joined: Sun Feb 26, 2012 5:48 pm
Posts: 552
Before Blasting

Image

after blasting , the original battery tray still is solid with only minor repairs needed.

Image

Image

_________________
Jason Wallace
smgpsinstall.com

1958 Ragtop ( show car project )
1966 Vert ( My Driver )
2013 turbo beetle (Amys driver)


Top
 Profile  
 
 Post subject: Re: 58 ragtop Houston TX
PostPosted: Fri Mar 29, 2013 8:01 am 
Offline
dLk Redneck
User avatar

Joined: Tue Jan 22, 2008 5:58 pm
Posts: 10199
Location: Spring
Looking Good!

_________________
Ethan Dunlap
Spring, Texas


Top
 Profile  
 
 Post subject: Re: 58 ragtop Houston TX
PostPosted: Fri Mar 29, 2013 8:03 am 
Offline
User avatar

Joined: Sun Feb 26, 2012 5:48 pm
Posts: 552
Lazer blue will be the color

Image

wheels have been delivered

Image

And I still have the detailed fuchs.

Should be painted in the next couple of weeks.

_________________
Jason Wallace
smgpsinstall.com

1958 Ragtop ( show car project )
1966 Vert ( My Driver )
2013 turbo beetle (Amys driver)


Top
 Profile  
 
 Post subject: Re: 58 ragtop Houston TX
PostPosted: Fri Mar 29, 2013 5:28 pm 
Offline
User avatar

Joined: Wed Sep 29, 2010 6:54 pm
Posts: 374
Location: DFW
Looking good :thumbs:


Top
 Profile  
 
 Post subject: Re: 58 ragtop Houston TX
PostPosted: Wed May 01, 2013 4:24 pm 
Offline
User avatar

Joined: Sun Feb 26, 2012 5:48 pm
Posts: 552
Image


Image

Image

_________________
Jason Wallace
smgpsinstall.com

1958 Ragtop ( show car project )
1966 Vert ( My Driver )
2013 turbo beetle (Amys driver)


Top
 Profile  
 
 Post subject: Re: 58 ragtop Houston TX
PostPosted: Thu May 02, 2013 7:18 am 
Offline
User avatar

Joined: Tue Sep 28, 2010 5:56 pm
Posts: 2305
Location: Rosenberg TX
Sexy... :thumbs:

_________________
RedJames


Top
 Profile  
 
 Post subject: Re: 58 ragtop Houston TX
PostPosted: Thu May 02, 2013 1:02 pm 
Offline
User avatar

Joined: Sun Feb 26, 2012 5:48 pm
Posts: 552
Thanks James, here is another shot with more light on it. Its a bright but once the body is on it and all the parts are mounted it will tone it down.

Image

_________________
Jason Wallace
smgpsinstall.com

1958 Ragtop ( show car project )
1966 Vert ( My Driver )
2013 turbo beetle (Amys driver)


Top
 Profile  
 
 Post subject: Re: 58 ragtop Houston TX
PostPosted: Thu May 02, 2013 1:24 pm 
Offline
dLk po-lease
User avatar

Joined: Wed Jan 23, 2008 9:33 pm
Posts: 4871
Location: Spring, Tx.
Looks nice. Any ground be sure and grind all the way to bare metal. I zinked then powder coated my oval chassis and I had to grind and grind to get a good ground.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 98 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7, 8, 9, 10  Next

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group