Faking the Funk huh

Heck ya, when the fake funk only cost me $10 for the vents and $30 for a decklid, vs the $300 for the real deal, I will fake it all day long Besides my whole car is fake funk

Here are a few more follow up pics from last night.
Clutch tube now in the correct position:


Closed up some of the tunnel again to help give some strenght back(will come back to this later):


Welded up the old brake line hole, a plate for the rhd pedals to sit on, and the tab for the plate light that was missing.




Hope to have some of these ground down tomorrow after church. Also finally got the hinge pin out

looks like a robot face....great work man looks like its moving along quickly

I am gonna fake the funk on my trailer.

nice lid that used to be mine great work you did to it ..

Ok so I was thinking that since the pan is probably going to be taking a beating, I just dont see the point of doing something super shiney and have it get all scratched up. So I was thinking of going this route. This way if I scratch it, I just get under there and touch it up. Thoughts/comments....
I have heard that Herculiner is great stuff. I was looking at this stuff here though:




This is fresh UPol bedliner as seen in the product photos earlier. It looks EXACTLY like the original undercoating. With the hardener it's rock solid.

And about the product. (What I like about it, is says that it is UV proof too):
• Easy to use-simply fill - shake - shoot

• Choice of pot life/dry times controlled by the speed of the hardener

• Enough material to re-spray the largest truck beds

• Dries rapidly & UV resistant

• Scratch & Stain resistant

• Protects against rust, corrosion salt, damp & extreme temperatures

• Waterproof, flexible, helps deaden sound & vibrations

• Apply with shutz gun, roller or brush to obtain different textures

• Provides excellent adhesion

KIT CONTAINS: 4 - 750ML TRUCK BEDLINER BASE,1 - 1LTR SYSTEM 2030 HARDENER (TOTAL 1.06GL)

MIXING RATIO 3:1

COVERAGE 125SQ.FT.

30 MINUTES BETWEEN COATS DELIVER AFTER 1 HOUR(AIR DRY 15 MIN THEN 30MIN AT 140 DEG

do that you cant see it anyways .

any updates? or is it to hot there to be working?

The Turd animated...................

No updates other than I have been going through a divorce. The car is currently on hold for two reasons. One my garage is hot as the surface of the sun and two the ex took care of excess fundage for the car with the divorce The car was a week away from going to the media blasters. Dont worry though, I am saveing money and the progress with resume once it cools down a little