Chris P's '67 Ghia

notchback65 · **Posted:** Wed Nov 11, 2009 8:59 pm

Nice work

ffemt300 · **Posted:** Thu Nov 12, 2009 6:01 pm

Looks great! wish I could weld...

Chris P · **Posted:** Sun Nov 15, 2009 4:10 pm

Getting closer to finishing the pan welding. With James' help, I was able to get the seat belt anchor plates and the pedal stop welded in. Next I will need to get the seat tracks and jack points welded on. After that, that the welding for the pan will be done. :dance:

Here is a shot at what I am up to as well...

Thanks for the help James.

jeremy57 · **Joined:** Mon Jan 05, 2009 7:23 pm **Posts:** 1020

how narrow u going

Chris P · **Posted:** Sun Nov 15, 2009 5:40 pm

jeremy57 wrote:

how narrow u going

4 inches

Chris P · **Posted:** Mon Nov 16, 2009 10:43 am

I was able to get some blasting and some painting done yesterday.
Here are the valve covers and manifolds for the Kads...

Does anybody know why there are tabs with a hole in it on these valve covers? They interfere with mounting properly so I just carefully bent them back...

ffemt300 · **Posted:** Tue Nov 17, 2009 6:38 pm

nice work! those look great!

Chris P · **Posted:** Tue Nov 17, 2009 8:47 pm

Thanks for the comments, guys!

Here is the mock up of the engine so far:

Anybody have setup instructions on how the Kadrons are to be? I need to know how to setup fuel connection and tuning...

gostros · **Posted:** Tue Nov 17, 2009 8:54 pm

Chris P wrote:

Thanks for the comments, guys!

Here is the mock up of the engine so far:

Anybody have setup instructions on how the Kadrons are to be? I need to know how to setup fuel connection and tuning...

i have a sync tool you can borrow. if you need it

jeremy57 · **Joined:** Mon Jan 05, 2009 7:23 pm **Posts:** 1020

i have them on my motor u can check them out if u want

Chris P's '67 Ghia

Who is online