65 Beetle Project

beetleluvr · **Posted:** Sat Jan 23, 2010 9:40 pm

Sorry that I did not make it by to lend a hand. Sounds like you had a crew though. I actually worked on installing my 1835 in the 66 today. I just need to sew up a few things and see if I can get it to fire up. I am hoping to have it ready to go by next weekend.

oval1 · **Posted:** Sat Jan 23, 2010 9:42 pm

Glad you guys had fun!

Boom · **Posted:** Sat Jan 23, 2010 9:52 pm

beetleluvr wrote:

Sorry that I did not make it by to lend a hand. Sounds like you had a crew though. I actually worked on installing my 1835 in the 66 today. I just need to sew up a few things and see if I can get it to fire up. I am hoping to have it ready to go by next weekend.

hope to see it at the gtg

The Toy Box · **Joined:** Tue Jan 22, 2008 10:08 pm **Posts:** 392

gostros wrote:

Thanks everyone for coming out. We got the fuel lines hooked up. We figured out that I did a few things wrong

Got the new throttle cable hooked up. We removed the windshield and then realized that I had the wrong one to replace it. So, if anyone has the windshield for a 65, I'm interested.
We didn't get the car running, but we did get some things done.

Thanks again Ethan and Courtney for letting us use your place to work on the cars.

Bo, I'll have your windshield later today with new cal rubber. The lower seat brace will more likely be here today as well. The dash I will cut it out for you sometime next week if I can. Its yours for free bro..anything else please let me know as this 66 is getting cut up, and most if not all is going to the scrap yard. Do you still need that quarter panel??

kostya.lyt · **Posted:** Sun Jan 24, 2010 12:22 pm

The Toy Box wrote:

gostros wrote:

Thanks everyone for coming out. We got the fuel lines hooked up. We figured out that I did a few things wrong

Got the new throttle cable hooked up. We removed the windshield and then realized that I had the wrong one to replace it. So, if anyone has the windshield for a 65, I'm interested.
We didn't get the car running, but we did get some things done.

Thanks again Ethan and Courtney for letting us use your place to work on the cars.

Bo, I'll have your windshield later today with new cal rubber. The lower seat brace will more likely be here today as well. The dash I will cut it out for you sometime next week if I can. Its yours for free bro..anything else please let me know as this 66 is getting cut up, and most if not all is going to the scrap yard. Do you still need that quarter panel??

Not trying to thread jack, but do you have the A-pillars?

The Toy Box · **Joined:** Tue Jan 22, 2008 10:08 pm **Posts:** 392

kostya.lyt wrote:

The Toy Box wrote:

gostros wrote:

Thanks everyone for coming out. We got the fuel lines hooked up. We figured out that I did a few things wrong

Got the new throttle cable hooked up. We removed the windshield and then realized that I had the wrong one to replace it. So, if anyone has the windshield for a 65, I'm interested.
We didn't get the car running, but we did get some things done.

Thanks again Ethan and Courtney for letting us use your place to work on the cars.

Bo, I'll have your windshield later today with new cal rubber. The lower seat brace will more likely be here today as well. The dash I will cut it out for you sometime next week if I can. Its yours for free bro..anything else please let me know as this 66 is getting cut up, and most if not all is going to the scrap yard. Do you still need that quarter panel??

Not trying to thread jack, but do you have the A-pillars?

Door pillars, or windshield pillars??.only thing gone so far is: front clip,windshield,rear seat brace,front beam(complete). Everything else is still there..let me know whatca need before I start cutting the rest.

kostya.lyt · **Posted:** Sun Jan 24, 2010 2:25 pm

The Toy Box wrote:

kostya.lyt wrote:

The Toy Box wrote:

gostros wrote:

Thanks everyone for coming out. We got the fuel lines hooked up. We figured out that I did a few things wrong

Got the new throttle cable hooked up. We removed the windshield and then realized that I had the wrong one to replace it. So, if anyone has the windshield for a 65, I'm interested.
We didn't get the car running, but we did get some things done.

Thanks again Ethan and Courtney for letting us use your place to work on the cars.

Bo, I'll have your windshield later today with new cal rubber. The lower seat brace will more likely be here today as well. The dash I will cut it out for you sometime next week if I can. Its yours for free bro..anything else please let me know as this 66 is getting cut up, and most if not all is going to the scrap yard. Do you still need that quarter panel??

Not trying to thread jack, but do you have the A-pillars?

Door pillars, or windshield pillars??.only thing gone so far is: front clip,windshield,rear seat brace,front beam(complete). Everything else is still there..let me know whatca need before I start cutting the rest.

I need the windshield pillars, with maybe a foot of heater channel to either side.

gostros · **Posted:** Sun Jan 24, 2010 3:19 pm

thanks Gabe! :thumbs:

The Toy Box · **Joined:** Tue Jan 22, 2008 10:08 pm **Posts:** 392

Thanks again Ethan and Courtney for letting us use your place to work on the cars.[/quote]

Bo, I'll have your windshield later today with new cal rubber. The lower seat brace will more likely be here today as well. The dash I will cut it out for you sometime next week if I can. Its yours for free bro..anything else please let me know as this 66 is getting cut up, and most if not all is going to the scrap yard. Do you still need that quarter panel??[/quote]

Not trying to thread jack, but do you have the A-pillars?[/quote]

Door pillars, or windshield pillars??.only thing gone so far is: front clip,windshield,rear seat brace,front beam(complete). Everything else is still there..let me know whatca need before I start cutting the rest.[/quote]

I need the windshield pillars, with maybe a foot of heater channel to either side.[/quote]

How about ill cut whats left of the front in half and you can have it..

kostya.lyt · **Posted:** Sun Jan 24, 2010 6:37 pm

The Toy Box wrote:

Thanks again Ethan and Courtney for letting us use your place to work on the cars.

Bo, I'll have your windshield later today with new cal rubber. The lower seat brace will more likely be here today as well. The dash I will cut it out for you sometime next week if I can. Its yours for free bro..anything else please let me know as this 66 is getting cut up, and most if not all is going to the scrap yard. Do you still need that quarter panel??[/quote]

Not trying to thread jack, but do you have the A-pillars?[/quote]

Door pillars, or windshield pillars??.only thing gone so far is: front clip,windshield,rear seat brace,front beam(complete). Everything else is still there..let me know whatca need before I start cutting the rest.[/quote]

I need the windshield pillars, with maybe a foot of heater channel to either side.[/quote]

How about ill cut whats left of the front in half and you can have it..[/quote]

Will it fit in the trunk of my car? :help:

65 Beetle Project

Who is online